Ecobase Garden Building & Shed Base System
Ecobase is a quick and easy solution for your shed base, and can be used with or without the gravel infill.
The tiles slot together to create a sturdy base for your shed and come complete with weed membrane and pegs.
Each tile measures 50cm, please see the guide below.
6 x 4ft shed (1.8 x 1.2) will need 12 tiles
8 x 6ft shed ( 2.4 x 1.8) will need 20 tiles
10 x 8ft shed ( 3.0 x 2.4 ) will need 30 tiles
8 x 8ft shed (2.4 x 2.4 ) will need 25 tiles
To work out how many tiles you need please allow at least 2 tiles for each metre length of your shed and multiply length by width. ie. a 1.8m x 1.2m shed will need 4 tiles x 3 tiles = 12 tiles
1. Clear and prepare a level area of land just larger than the area needed for your building. EcoBase grids can be laid directly on to grass, gravel or bare land.
2. Cover the area with a Geotextile permeable membrane to prevent weeds, to stop worm action and to hold any pea gravel in place, if used. Tip: Measure your building and then add at least 6 inches to the perimeter of the membrane.
3. Lay out your grids, making sure the feet are facing down. Cut grids to size using a hand saw where required. Interlock each grid and then secure using the EcoPins (12 per grid) to create your finished base.
 |  |  |
..
For larger and heavier buildings such as log cabins it is advisable to infill the tiles with shingle for added strength. For log cabins with sturdy floors and beams it is often not necessary to use Ecobase tiles across the entire floor area, as the same benefits can be achieved using fewer tiles to cover load bearing points, which will also offer greater economy. Please contact us for assistance in calculating your requirements.
Price is for 1 tile, please enter quantity needed in your basket at checkout also please advise us the size of your building so that we can send the correct amount of weed membrane with your tiles.
Please note the minimum order is 8 tiles
