Wisedim Pir Kit - 4 Channel, Style Switch, Remote And Pir
The WiseDim is a new dimmable WiseBox. The WiseDim Kit has a receiver that has four
700W dimmable channels. These channels can be changed from dimming to switching if
the load cannot be dimmed. The kit also includes a 4 button remote keyfob and a 7 button
wall switch. The 7 button wall switch will operate 4 channels and the extra buttons on the
7 button switch will bring 2 channels on, 4 channels on and turn all channels off. Each
circuit on the WiseDim is fused individually with a 6 Amp fuse to protect all the circuits.
Specifications
Height 198mm
Height (Incl. Glands) 227mm
Width 256mm
Depth 100mm
Max Wattage/Circuit 700 W
Min Wattage/Circuit 60 W
Max Wattage 2800 W
Voltage 240V
IP Rating IP54
Range Up to 200m
The radio PIR sensor is a battery powered unit that is rated IP44. You can place the sensor anywhere
you like without the need to hard wire it. The sensor can be mounted on the ceiling or wall.
The eyeball has the word ‘top’ printed on it. Whichever way you fit the sensor the word ‘top’ must be at the top.
The sensor can only be programmed to one channel on the WiseDim Box. You can add up to 32 switches to the WiseDim.
The PIR sensor can be placed inside or outside. It has a range of up to 100 metres from the receiver.
Specifications
Height 115mm
Width 86mm
Depth 126mm
